Choose the Right Ebb & Flow Hydroponic Tray
Compare durable, UV-resistant hydroponic trays for professional flood and drain growing systems. Choose the right format for your rack, grow table and production layout:
- Ebb & Flow Hydroponic Tray 60 × 120 cm – a compact, one-piece tray for smaller growing areas.
- Ebb & Flow Hydroponic Tray 90 × 180 cm – a flexible format with marked inlet and outlet locations.
- Ebb & Flow Hydroponic Tray 120 × 240 cm – a large, one-piece tray with no gluing required.
- Ebb & Flow Hydroponic Tray 120 × 270 cm – the largest format, supplied in two sections for extra-large growing areas.
Review the construction, drainage preparation, included components and installation requirements to select the best hydroponic tray for your growing system.
How Do Ebb & Flow Hydroponic Trays Work?
Ebb and Flow trays, also known as hydroponic flood trays, form the working area of a flood and drain system. During each watering cycle, the tray is filled with water or nutrient solution and then drained.
Choosing the right tray depends on the available growing area, rack or grow table dimensions, drainage layout and installation requirements.
Compare Ebb & Flow Hydroponic Trays
Size | Construction | Drainage preparation | Components included | Typical application |
|---|---|---|---|---|
60 × 120 cm | One-piece construction | One factory-made 27 mm opening | Filter/sieve and connector | Compact racks, smaller flood zones and growing areas with limited space |
90 × 180 cm | Large-format tray with marked drilling locations | The grower selects the inlet and outlet positions | Filter/sieve | Installations requiring flexible positioning of the inlet and drain |
120 × 240 cm | One-piece construction; no gluing required | One factory-made 27 mm opening | Filter/sieve and connector | Large growing areas where a one-piece tray is preferred |
120 × 270 cm | Two sections measuring 240 cm and 30 cm | One factory-made 27 mm opening | Filter/sieve and irrigation connector | Extra-large racks or custom-built hydroponic tables where maximum growing area is required |
How to Choose the Right Hydroponic Tray Size
Measure your rack or grow table. Check its internal width and length. Leave sufficient space for access, cleaning and drainage connections.
Plan the inlet and drain position. The 90 × 180 cm model allows you to select both positions during installation.
Check the delivery route. Make sure large one-piece trays will fit through doors, corridors and lifts.
Consider assembly. The 120 × 240 cm tray is supplied as one piece, while the 120 × 270 cm model consists of two sections that must be glued together.
Match the tray to your growing area. Consider the required growing surface and how the tray will fit into your normal production workflow.
Looking for smaller trays for individual microgreen crops? Visit our Microgreen Growing Trays category.
Hydroponic Growing Guides
Learn more about planning, using and maintaining your growing trays:
BESTSELLERS
€7.21
Regular price:
€7.59
€55.96
Regular price:
€58.90